Crosby Bolt Type Anchor Shackle G-2130

Crosby Bolt Type Anchor Shackle G-2130

Material:
Forged, Quenched & Tempered, with alloy bolts.
Safety Factor: 6:1

Surface Treatment:
Hot-dip galvanized (G) - 85T, 120T, and 150T
shackles are all hot-dip galvanized bows and the bolts are Dimetcoted® and
painted red.

Working Load Limit and Grade 6 permanently shown on every shackle. Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.

Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certifications. 

Approved for use at -40° C to 204°.

Meets or exceeds all requirements of ASME B30.26, Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available.

3.1 Certification as standard available for charpy and statistical proof test from 3.25t up to 25 tons to DNV 2.7-1 and EN13889.

Crosby 3.25t through 25t G-2130OC anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 42 Joules min. avg. at -20° C. The tests are conducted by Crosby and 3.1 test certification is available upon request

G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C271G, Type IVA, Grade A, Class 3, except for those provisions required of the contractor. 

Look for the Red Pin®... the mark of genuine Crosby quality.